Gentle and low-pulsation dosing of aggressive chemicals without pressure peaks and with minimized dead time. This is made possible by MEMDOS SMART, a new type of stepper motor dosing pump that Lutz-Jesco will be presenting at Achema 2024, the world’s leading trade fair for the process industry. The Industry 4.0-compatible dosing pump can be operated […]
A new type of laser-based immersion probe, which the Fraunhofer Institute for Laser Technology ILT in Aachen is testing as part of BMBF- and EU-funded projects with industrial partners and users, could pave the way for continuous inline monitoring of water treatment processes in wastewater treatment plants. The 2D fluorescence measurement method generates spectroscopic data […]
With its new patented seal system for filling needle and filling pipe systems, valve producer GEMÜ has brought to market the first ever adaptation option for filling needles that ensures hermetic separation between the actuator and medium. This means that any lift effect and contamination of the medium can be avoided. On the basis of […]
At IFAT, Vogelsang GmbH & Co. KG will be showing the conical HiCone progressive cavity pump for use in wastewater treatment plants and pump stations. Additionally, a 3D model of a small, compact version of the HiCone will be on display. “Wastewater treatment plants that consume large amounts of power in the municipal area owing […]
Vogelsang recently launched a new line of positive displacement pumps that was designed specifically around the typical requirements of industrial pumping applications, including those of the oil and gas market. EP Series: rotary lobe pumps for extreme conditions and high-pressure performance The EP series handles extreme conditions and constant high pressures. A heavy-duty gearbox allows […]
In recent years, the composition of wastewater has changed considerably, and pumping of untreated raw wastewater has become more and more challenging. Pump hydraulics which were used in the past without any problems and with satisfactory results, are becoming clogged more and more often. In the past few years, Egger has become known for its […]
Sensor Technology has extended its new range of torque sensors with a model that has the sensing head and electronics in separate housings. This has two advantages: the sensing head can fit into very confined spaces, and the electronics can be located in a position where they are protected from physical damage, dust, dirt, moisture, […]
New regulation from the Environmental Protection Agency (EPA) has established legally enforceable limits for certain PFAS in drinking water. PFAS, also known as “forever chemicals,” are a category of manufactured chemicals commonly used in industry and consumer products, which are resistant to breakdown in the environment and are commonly found in water sources. The EPA […]
Introducing the ACH580 4X variable frequency drive (VFD), a new addition to ABB’s all-compatible drive portfolio that is built for outdoor installation and extreme environments in the HVACR industry. Certification to UL Type 4X (NEMA 4X and IP66 rating) ensures protection against rain, cold, snow, salt spray, and dust as well as corrosion due to […]
The new ball valves in the GEMÜ BB0F series from valve specialists GEMÜ cover a wide range of applications in the chemical industry thanks to their configuration and the available construction and actuator versions. In the standard version, the media wetted seat seals are made of PTFE with glass-fibre reinforcement (reinforced PTFE). This is what […]
The pump industry is an enormous industry and plays a critical role in almost every facet of our lives. Water supply, fire protection, oil & gas, power plants, waste water treatment, sump pumps at homes, processing chemicals, foods & pharmaceuticals, and many more.
